Loading ...
Loading ...
Loading ...
User Guide 980
Configuring sFlow (Only for Certain Devices) sFlow Configuration
Choose the menu MAINTENANCE > sFlow> sFlow Sampler to load the following page.
Figure 2-3 Configuring the sFlow Sampler
Follow these steps to configure the sFlow Sampler:
1) Set one or more ports to be Samplers and configure the relevant parameters . One port
can be bound to only one collector.
Collector ID Choose a collector to be bound with the port.
Ingress Sampling
Rate (Hz)
Specify the ingress sampling frequency; the sampler takes one packet out of the
specified number of packets. Valid values are from 1024 to 65535. The default is
0 which means no packets will be sampled.
Egress Sampling
Rate (Hz)
Specify the egress sampling frequency; the sampler takes one packet out of the
specified number of packets. Valid values are from 1024 to 65535. The default is
0 which means no packets will be sampled.
Maximum Header
Size (Bytes)
Specify the maximum number of bytes that should be copied from a sampled
packet. Valid values are from 18 to 256 bytes and the default is 128 bytes.
LAG Displays the LAG the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...