Loading ...
Loading ...
Loading ...
User Guide 508
Configuring PPPoE ID Insertion (Only for Certain Devices) PPPoE ID Insertion Configuration
Circuit-ID Enable or disable the Circuit-ID Insertion feature. With this option enabled,
the switch will insert a Circuit ID to the received PPPoE Discovery packet
on this port.
Circuit-ID Type Select the type of the Circuit ID. The following options are provided:
IP: The circuit ID includes the following three parts: the source MAC
address of the received packet, the IP address of the switch and the port
number. This is the default value.
MAC: The circuit ID includes the following three parts: the source MAC
address of the packet, the MAC address of the switch and the port
number.
UDF: The circuit ID includes the following three parts: the source MAC
address of the packet, the user-specified string and the port number.
UDF Only: Only the user specified string will be used to encode the
Circuit-ID option.
UDF Value If UDF or UDF Only is selected, specify a string with at most 40 characters
to encode the Circuit-ID option.
Remote-ID Enable or disable the Remote-ID Insertion feature. With this option
enabled, the switch will insert a Remote ID to the received PPPoE
Discovery packet on this port.
Remote-ID Value Specify a string with at most 40 characters to encode the Remote-iID
option.
Note:
The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and not its
own. The configurations of the port can take effect only after it leaves the LAG.
2.2 Using the CLI
Follow these steps to configure PPPoE ID Insertion:
Step 1 configure
Enter global configuration mode.
Step 2 pppoe id-insertion
Globally enable the PPPoE ID Insertion feature.
Step 3 interface { fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
Enter interface configuration mode.
Step 4 pppoe circuit-id
Enable Circuit-ID Insertion feature, and the switch will insert a Circuit ID to the received
PPPoE Discovery packet on this port.
Loading ...
Loading ...
Loading ...