Loading ...
Loading ...
Loading ...
User Guide 516
Configuring Layer 3 Interfaces Layer 3 Interface Configurations
2.1.2 Configuring IPv4 Parameters of the Interface
In
Figure 2-1
you can view the corresponding interface you have created in the Interface
List section. On the corresponding interface entry, click Edit IPv4 to load the following
page and edit the IPv4 parameters of the interface.
Figure 2-2 Configuring the IPv4 Parameters
1) In the Modify IPv4 Interface section, configure relevant parameters for the interface
according to your actual needs. Then click Apply.
Interface ID Displays the interface ID.
Admin Status Enable the Layer 3 capabilities for the interface.
Interface Name (Optional) Enter a name for the interface.
IP Address Mode Specify the IP address assignment mode of the interface.
None: No IP address will be assigned.
Static: Assign an IP address manually.
DHCP: Obtain an IP address through DHCP.
BOOTP: Obtain an IP address through BOOTP.
IP Address Specify the IP address of the interface if you choose “Static” as the IP address
assignment mode.
Subnet Mask Specify the subnet mask of the interface’s IP address.
Loading ...
Loading ...
Loading ...