Loading ...
Loading ...
Loading ...
(49,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
WARNING
Fastening the seatbelt with the web-
bing twisted can increase the risk or
severity of injury in an accident.
When fastening the belt after it is
pulled out from the retractor, espe-
cially when inserting the anchor
tongue plate into the mating buckle
(on right-hand side), always check
that the webbing is not twisted.
WARNING
. Be sure to fasten both tongue
plates to the respective buckles.
If the seatbelt is used only as a
shoulder belt (with the anchor
tongue plate not fastened to the
anchor buckle on the right-hand
side), it cannot properly restrain
the wearer in position in an
accident, possibly resulting in
serious injury or death.
. Before fastening the seatbelt,
confirm that the seatbelt is routed
through the belt guide. A seatbelt
not routed through the belt guide
can cause neck injuries during
sudden braking or in a collision,
since it may slip up on the neck.
The rear center seatbelt is stowed in the
seatbelt holder on the right side of the
cargo area.
1. Raise the head restraint to the ex-
tended position. Do not remove the
head restraint.
2. Remove the center seatbelt tongue
plate, and then slide the webbing to
remove the seatbelt from the belt
holder and pull out the seatbelt slowly.
– CONTINUED –
Seatbelts
47
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...