Loading ...
Loading ...
Loading ...
(444,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
5. When the keyless access with push-
button start system is deactivated,
press the push-button ignition switch
with the brake pedal released. The
status of the push-button ignition
switch then changes to “ON”.
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
& Starting Engine
s09ap03
1. Apply the parking brake.
2. Place the select lever in the “P”
position.
3. Depress the brake pedal.
4. Hold the access key fob with the
buttons facing you, and touch the
push-button ignition switch with it.
When the communication between the
access key fob and the vehicle is
completed, a chime (ding) will sound.
At the same time, the push-button
ignition switch turns to the “ACC” or
“ON” position.
5. After the push-button ignition switch
turns to the “ACC” or “ON” position,
while depressing the brake pedal,
press the push-button ignition switch.
NOTE
If the engine does not start even though
the above procedure was followed
precisely, contact your SUBARU dealer.
9-10. Rear Gate – If the Rear
Gate Cannot Be Opened
s09ag
In the event that you cannot open the rear
gate by pressing the rear gate opener
button, you can open it from inside the
cargo area.
1. Cover the tip of a flat-head screwdriver
with vinyl tape or cloth so that it will not
scratch. Remove the access cover at
the bottom-center of the rear gate trim
using flat-head screwdriver.
Rear Gate – If the Rear Gate Cannot Be Opened
442
Loading ...
Loading ...
Loading ...