Loading ...
Loading ...
Loading ...
(368,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
following vehicles and objects.
– Small motorcycles, bicycles, pe-
destrians, stationary objects on
the road or road side, etc.
– Vehicles with body shapes that
the radar may not reflect (vehi-
cles with lower body height such
as a trailer with no cargo and
sports cars)
– Vehicles that are not approaching
your vehicle even though they
are in the detection area (either
on a neighboring lane to the rear
or beside your vehicle when
reversing) (The system deter-
mines the presence of approach-
ing vehicles based on data de-
tected by the radar sensors.)
– Vehicles traveling at significantly
different speeds
– Vehicles driving in parallel at al-
most the same speed as your
vehicle for a prolonged time
– Oncoming vehicles
– Vehicles in a lane beyond the
neighboring lane
– Vehicles traveling at a signifi-
cantly lower speed that you are
trying to overtake
. On a road with extremely narrow
lanes, the system may detect vehi-
cles driving in a lane next to the
neighboring lane.
& BSD/RCTA Approach Indica-
tor Light/Warning Buzzer
s07bm03
While the BSD/RCTA is active, the follow-
ing item(s) will operate to alert the driver:
. The BSD/RCTA approach indicator
light (when there are vehicles in the
neighboring lanes).
. The BSD/RCTA approach indicator
light and warning buzzer (when a
vehicle is approaching from the left or
right side while your vehicle is rever-
sing)
! BSD/RCTA approach indicator light
s07bm0301
BSD/RCTA approach indicator light
It is mounted on each side of the outside
mirrors.
The indicator light will illuminate when a
vehicle approaching from behind is de-
tected.
The indicator light will flash to warn the
driver of dangers under the following
conditions.
. While the indicator light is illuminating, if
the turn signal lever is operated toward
the side in which this light turned on
. When reversing the vehicle while the
system detects a vehicle approaching
from either side
! BSD/RCTA approach indicator
light dimming function
s07bm030101
When the headlights are turned on, the
brightness of the BSD/RCTA approach
indicator light will be reduced.
NOTE
. You may have difficulty seeing the
BSD/RCTA approach indicator light
under the following conditions.
– When sunlight shines directly on
it
– When the headlight beams from a
vehicle traveling behind shines
directly on it
. While the illumination brightness
control dial is in the fully upward
position, even if the headlights are
BSD/RCTA
366
Loading ...
Loading ...
Loading ...