Loading ...
Loading ...
Loading ...
(433,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
vehicle higher than necessary.
11. Remove the wheel nuts and the flat
tire.
12. Before putting the spare tire on, clean
the mounting surface of the wheel and
hub with a cloth.
13. Put on the spare tire. Replace the
wheel nuts. Tighten them by hand.
WARNING
Do not use oil or grease on the wheel
studs or nuts when the spare tire is
installed. This could cause the nuts
to become loose and lead to an
accident.
14. Turn the jack handle counterclockwise
to lower the vehicle.
15. Use the wheel nut wrench to securely
tighten the wheel nuts to the specified
torque, following the tightening order in
the illustration.
For the wheel nut tightening torque,
refer to “Tires” �P507. Never use your
foot on the wheel nut wrench or a pipe
extension on the wrench because you
may exceed the specified torque. Have
the wheel nut torque checked at the
nearest automotive service facility.
1 Support holder
16. Store the flat tire in the spare tire
compartment. Install with the support
holder facing upward and secure the
flat tire by firmly tightening the attach-
ing bolt.
NOTE
If you cannot fix the flat tire firmly, try
turning the support holder upside
down.
17. Store the jack, jack handle and wheel
nut wrench in their storage locations.
– CONTINUED –
Flat Tires
431
9
In Case of Emergency
Loading ...
Loading ...
Loading ...