Loading ...
Loading ...
Loading ...
(37,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
! Head restraint height adjustment
s01aa0401
1 Head restraint
2 Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while press-
ing the release button on the top of the
seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks. Press and hold
the release button to lower the head
restraint.
Each head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant’s ears.
NOTE
It is not possible to remove or install the
head restraint without reclining the
front seatback. Reclining the front seat-
back and then remove or install the
head restraint.
1-2. Seat Heater (If Equipped)
s01ab
The seat heater is equipped in the front
seats.
The seat heater operates when the ignition
switch is either in the “ACC” or “ON”
position.
CAUTION
. Do not put hard or heavy objects
or ones with protrusions on the
seat, and do not stab the seat
with sharp objects, such as pins
or needles.
. People with delicate skin may
suffer slight burns even at low
temperatures if they use the seat
heater for a long period of time.
When using the heater, always be
sure to warn the persons con-
cerned.
. Do not put anything on the seat
which insulates against heat,
such as a blanket, cushion, or
similar items. This may cause the
seat heater to overheat.
. When the seat is warmed enough
or before you leave the vehicle,
be sure to turn off the seat heater.
– CONTINUED –
Seat Heater
35
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...