Loading ...
Loading ...
Loading ...
(490,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
3. If the new blade rubber is not provided
with two metal spines, remove the
metal spines from the old blade rubber
and install them in the new blade
rubber.
4. Align the claws of the plastic support
with the grooves in the blade rubber
assembly, then slide the blade rubber
assembly into place.
Securely retain both ends of the rubber
with the stoppers on the plastic support
ends. If the rubber is not retained
properly, the wiper may scratch the rear
window glass.
5. Install the wiper blade assembly to the
wiper arm. Make sure that it locks in
place.
6. Hold the wiper arm by hand and slowly
lower it in position.
11-20. Battery
s11ba
WARNING
. Before beginning work on or near
any battery, be sure to extinguish
all cigarettes, matches, and light-
ers. Never expose a battery to an
open flame or electric sparks.
Batteries give off a gas which is
highly flammable and explosive.
. For safety, in case an explosion
does occur, wear eye protection
or shield your eyes when working
near any battery. Never lean over
a battery.
. Do not let battery fluid contact
eyes, skin, fabrics, or paint be-
cause battery fluid is a corrosive
acid. If battery fluid gets on your
skin or in your eyes, immediately
flush the area with water thor-
oughly. Seek medical help imme-
diately if acid has entered the
eyes.
If battery fluid is accidentally
swallowed, immediately drink a
large amount of milk or water,
and seek medical attention im-
mediately.
Battery
488
Loading ...
Loading ...
Loading ...