Loading ...
Loading ...
Loading ...
(485,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
11-18. Windshield Washer
Fluid
s11ax
Windshield washer fluid warning light
When there is only a small amount of
washer fluid remaining, the windshield
washer fluid warning light will appear.
When this occurs, refill the washer fluid
as follows.
1 “FULL” mark
Remove the washer tank filler cap, then
add fluid until it reaches the “FULL” mark
on the tank.
Use windshield washer fluid. If windshield
washer fluid is unavailable use clean
water.
In areas where water freezes in winter, use
an anti-freeze type windshield washer
fluid.
CAUTION
Never use engine coolant as washer
fluid because it could cause paint
damage.
If you fill the windshield washer tank with a
fluid with a different concentration from the
one used previously, purge the old fluid
from the piping between the windshield
washer tank and washer nozzles by
operating the washer for a certain period
of time. Otherwise, if the concentration of
the fluid remaining in the piping is too low
for the outside temperature, it may freeze
and block the nozzles.
CAUTION
. Adjust the washer fluid concen-
tration appropriately for the out-
side temperature. If the concen-
tration is inappropriate, sprayed
washer fluid may freeze on the
windshield and obstruct your
view, and the fluid may freeze in
the windshield washer tank.
– CONTINUED –
Windshield Washer Fluid
483
11
Maintenance and Service
Loading ...
Loading ...
Loading ...