Loading ...
Loading ...
Loading ...
(365,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
may be delayed, or the warning
buzzer may be delayed or inopera-
tive, even if there is a vehicle travel-
ing in a neighboring lane or ap-
proaching your vehicle from either
side.
The driver is responsible for paying
attention to the rear and side areas
of the vehicle.
& System Features
s07bm01
BSD/RCTA consists of the following func-
tions.
. To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching
at high speed while driving the vehicle
(Blind Spot Detection)
. To detect a vehicle approaching from
the right or left while reversing the
vehicle (Rear Cross Traffic Alert)
The system uses radar sensors for the
following features.
NOTE
The BSD/RCTA radar sensor has been
certified by radio wave-related laws
applicable in the U.S. and other FCC
compliant countries, including Canada.
When driving your vehicle in countries
other than the U.S. and Canada, you
must obtain certification for the coun-
try where you are driving the vehicle.
For more information on certification in
the U.S. and other FCC compliant
countries, including Canada, refer to
“Certification for the BSD/RCTA”
�P369.
! Blind Spot Detection (BSD)
s07bm0101
1 Operating range
The system notifies the driver of the
presence of vehicles in its blind spot.
. If the system detects a vehicle in its
blind spot, it warns the driver by
illuminating the BSD/RCTA approach
indicator light(s) on the outside mirror
(s).
. If the driver operates the turn signal
lever in the direction where the BSD/
RCTA approach indicator light is illumi-
nating, the system warns the driver of
dangers by flashing the BSD/RCTA
approach indicator light.
! Lane Change Assist (LCA)
s07bm010101
1 Operating range
The system notifies the driver of vehicles
approaching at a high speed in the
neighboring lanes.
. If the system detects a vehicle ap-
proaching at a high speed in the
neighboring lanes, it warns the driver
of dangers by illuminating the BSD/
RCTA approach indicator light(s) on the
outside mirror(s).
. If the driver operates the turn signal
lever in the direction where the BSD/
RCTA approach indicator light is illumi-
– CONTINUED –
BSD/RCTA
363
7
Starting and Operating
Loading ...
Loading ...
Loading ...