Loading ...
Loading ...
Loading ...
(133,1)
北米Model "A1520BE-A" EDITED: 2022/ 11/ 22
& Automatic Door Locking/Un-
locking
s02ac08
All the doors (including the fuel filler lid) are
automatically locked or unlocked under
the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
– When the select lever is shifted into
a position other than the “P” posi-
tion.
. For automatic door unlocking
– When the driver’s door is open
(factory default setting).
– When the ignition switch is turned to
OFF.
– When the select lever is shifted into
the “P” position.
NOTE
. The automatic door lock and unlock
setting can be changed with the
center information display. Refer to
“Car settings” �P203 (11.6-inch dis-
play models) or “Vehicle setting
icons” �P221 (dual 7.0-inch display
models).
. When locking the door by the power
door locking switches, automatic
door locking will not operate.
. When unlocking the door by the
power door locking switches, auto-
matic door unlocking will not oper-
ate.
. If the system detects a strong en-
ough impact to deploy the airbags,
all doors may be automatically un-
locked. For further details, refer to
“Automatic Door Locking/Unlocking
Operation When Involved in an Ac-
cident” �P445.
. When getting out of the vehicle from
a rear door, make sure to unlock all
the doors by pushing the unlock
side of the power door locking
switch. If a rear door is unlocked
from the inside door lever then the
door is opened and closed, the Key
lock-in prevention function will be
triggered. All doors will be unlocked,
the Key lock-in prevention warning
indicator “
” will appear and the
warning chime will also sound.
& Key Lock-In Prevention
Function
s02ac06
Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with the driver’s
door open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless
access with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before lock-
ing the doors.
. When getting out of the vehicle from
a rear door, make sure to unlock all
the doors by pushing the unlock
side of the power door locking
switch.
. When getting out of the vehicle from
a rear door, make sure to unlock all
the doors by pushing the unlock
side of the power door locking
switch. If a rear door is unlocked
from the inside door lever then the
door is opened and closed, the Key
lock-in prevention function will be
triggered. All doors will be unlocked,
the Key lock-in prevention warning
indicator “
” will appear and the
warning chime will also sound.
. The factory setting (default setting)
for this function is set as “opera-
tional”. This function’s operational/
non-operational setting can be
changed by a SUBARU dealer. Con-
tact a SUBARU dealer for details.
– CONTINUED –
Door Locks
131
2
Keys and Doors
Loading ...
Loading ...
Loading ...