Loading ...
Loading ...
Loading ...
•Troubleshooting
Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or
if the instruction below does not help, contact the nearest authorized Yamaha dealer or service center.
Problem
No sound.
Cause
PDX-50TX and another Yamaha product are not
connected since they are set to different groups.
The signals are obstructed because there is an
obstacle between the transmitting-side product
and this unit.
There is a device (microwave oven, wireless
LAN, etc.) outputting signals in 2.4 GHz
frequency band nearby.
The iPod or iPhone is not connected to PDX-
50TX firmly.
The firmware of the iPod or iPhone is not
updated.
Remedy
Set both PDX-50TX and another Yamaha
product to the same group.
Remove the obstacle.
Move this unit to another position.
Move PDX-50TX away from the device.
Connect the iPod or iPhone firmly.
Download the latest iTunes software to update
the firmware ol'the iPod or iPhone. For delails,
refer to the owner's manual supplied with your
iPod or iPhone,
The signal from PDX-50TX is blocked by your Change the way of holding, orientation, or
body or metallic objects, etc. position of PDX-50TX to avoid the obiecl
blocking the signal.
Charge the iPod or iPhone.
Turn up the volume.
Please wait for a while.
The battery of iPod or iPhone is low.
The w)lume is turned down.
It is in the process of a connection.
The protection circuitry has been activated by
excessive volume.
The iPod or iPhone being used is not supported
by this unit.
The iPod or iPhone is not connected to PDX-
50TX firmly.
Turn down the volume.
Controlling volume on the Use an iPod or iPhone supported by this
iPod or iPhone does not work. product.
Connect the iPod or iPhone lirmly.
Specifications
Supported iPod
......... iPod (5th generation), iPod classic, iPod nano, iPod touch
Supported iPhone
................ iPhone, iPhone 3G , iPhone 3GS (as of August 2009)
Power supply
U.S.A. and Canada models ............................... AC 120 V,60 Hz
Other models ..................................... AC 100 to 240 V, 50/60 Hz
Power consumption .................................................................. 4 W
Power consumption wilhout connecting iPod/iPhone
................................................................................ tess than 1 W
Transmission lange .... Approx. 20 m (66 ft) lwilhout inlerfercnce)
Maximum playback duration
.................................. Approx. 10 hours (from full charged iPod)
Dimensions (W x D x H)
PDX-50TX .......45.4 x 21.6 x 81 mm (I-29/32 x 718 x 3-7132 in)
PDX-50BC ......56 x 20.5 x 74 nun (2-7/32 x 13116x 2-15116 in)
Weight
PDX-50TX ............................................................. 29 g ( 1.02 oz)
PDX-50BC .......................................................... 29,5 g (1.04 oz)
Specifications are subject to change without notice
yA@red
iPod TM, iPhone TM
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
iPhone is a trademark of Apple Inc.
Made for 1
iPod
"Made for iPod" means that an electronic accessory
has been designed to connect specifically to iPod and
has been certifed by the developer to meet Apple
perlk)rmance standards.
"Works with iPhone'" means that an electronic
accessory has been designed to connect specifically to
iPhone and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible lk}rthe operation of this device
or its compliance with safety and regulatory standards.
9En
Loading ...
Loading ...
Loading ...