Loading ...
Loading ...
Loading ...
Status message Cause See
page
ACQUIRING Thesignalistooweak.
UPDATE The SiriusConnect tuner is updating the channel list.
The period of the subscription is end.
Remedy
Adjust the orientation of the antenna of the
SiriusConnect tuner. Use the "Antenna Level"
information on the fi'ont panel display to check the
antenna reception level.
Wait until the updating is complete.
Contact SIRIUS Satellite Radio to renew the
subscription.
Wait until the updating is complete.
27
Problem
The remote control does not work
and/or function properly.
FW UPDATING The SiriusConnect tuner is updating the firmware.
SUB UPDATED The subscription information is updated.
•Remote control
Cause See
page
Wrong distance or angle. 14
Remedy
The remote control functions within a rnaximum
range of 6 m (20 fl) and no more than 30 degrees off-
axis ['FOII1the front panel.
Reposition this unit.Direct sunlight or lighting (from an inverter type of
fluorescent lamp, etc.) is striking the remote control
sensor of this unit.
The batteries are weak. Replace all balteries.
Even if the remote control code is correctly set, there
are some models thai do not resi')ond to the remote
control.
14
42Cannot operate external
components with the remote
control of this unit.
•iPod
Problem
No sound.
The external component you want to operate is not Press the desired (_)luput selector key to select the
selected as the input source, external component you want to operate.
The remote control code was not correctly set. Set the remote control code correctly or try another 42
code %r the same manufacturer using the "List of
remote COiltrol codes".
Use the remote control supplied with the external
COlllponellt.
Remedy
Select the same group 1D as selected on this unit.
Set both PDX=50TX and this unit to the same group.
See
page
39
Cause
PDX-50TX is connected to another devk'e.
PDX-50TX and this unit are not connected since they
are set to different groups.
"Wireless Function" is set to "No".
Distance is too far.
There is a device (microwave oven, wireless LAN,
etc.) outputting signals in 2.4 GHz frequency band
nearby.
The iPod or iPhone is not connected to PDX-50TX
firmly.
The firmware of the iPod or iPhone is not updated.
Set "Wireless Function" to "Yes". 39
Move PDX-50TX closer to this unit.
Move this unit away from the device. If the device is
1EEE802.11 n-compliant, change the channel setting
of the device so as not to affect the unit.
Connect the iPod or iPhone firmly.
Download the latest iTunes soflware to update the
firmware of the iPod or iPhone.
The signal from PDX-50TX is blocked by your body Change the way of holding, orientation, or position of
or metallic objects, etc. PDX-50TX to avoid the object blocking the signal.
The battery of iPod or iPhone is low. Charge the iPod or iPhone.
The iPod or iPhone is in the process of connecting Please wait for a while.
with this unit.
Turn down the volume.
The protection circuitry has been activated by
excessive volume.
Use an iPod or iPhone supported by this unit.
Connect the iPod or iPhone firmly.
Controlling volume on the iPod or
iPhone does not work.
The iPod or iPhone being used is not supported by
this unit.
The iPod or iPhone is not connected to PDX-50TX
firmly.
21
30
Z
©
c
©
z
m
z
w
>
©
m
c
m
m
©
45 En
Loading ...
Loading ...
Loading ...