Loading ...
Loading ...
Loading ...
You can select an OSD language among English, German, French, Spanish, Italian, Dutch and Russian. Be%re operating
the following steps, select this unit as the video input oll your TV.
Press and hold (_}SETUP until the
"LANGUAGE SETUP" menu appears on your
TV.
", il uYi=JIUI=,P '@ ii iP'
-_ EN(iL :[SH
[;,ELFI'2;C:H
F t',an,;:.a s
ESF'_:i_OL,
:[mL :[¢_HO
NE:[)E:I:_:L,qN[:,2:
[ EN]ER ] ',',E_"_i:..e_".
2 Press (_)_ /_to select the desired
language and then press (_)ENTER.
Choices: ENGLISH (English), DEUTSCH (German),
Frauqais (French), ESPANOL (Spanish),
ITALIANO (Italian), NEDERLANDS (Dutch),
PyccKrffI (Russian)
Initial setting: ENGLISH (English)
3To exit from the menu, press {L)SETUP.
_sii_ the s%_em
iF_18/31@_y
Z
©
c
©
z
This unit creates a sound field by reflecting sound beams offthe walls of your listening room and by broadening the
cohesion of all the channels. Just as you would alTauge the speaker position of other audio systems, you need to set the
beam angle to enjoy the best possible sound fiom this unit.
• After you have completed the AUTO SETUP procedure, be sure to disconnect the ]ntelliBeam microphone.
• The IntelliBeam microphone is sensitive to heat.
Keep the IntelliBeam microphone away from direct sunlight.
Do not place the IntelliBeam microphone on top of this unit.
• You cannot use the AUTO SETUP when "PREOUT" is selected in "SOUND OUT" (page 38).
• You cannot run the AUTO SETUP while playing back the iPod/iPhone by using PDX-50TX. To run the AUTO SETUE stop playback
and then disconnect the iPod/iPhone from PDX-50TX. About PDX-50TX, refer to "Safety and Accessory Information" (separate
booklet).
Follow the procedure below to connect the IutelliBeam
microphone to this unit and place it in a proper location.
• Use the supplied cardboard microphone stand or a tripod
to >lacethe IntelliBeam microphone at the same height as
our ears would be when you are seated.
1 Connect the supplied IntelliBeam
microphone to the INTELLIBEAM MIC jack on
the front panel.
INTELLIBEAM MIC
Place the IntelliBeam microphone on a flat
level surface at your normal listening
position.
Place the hltelfiBeam microphone on the extended
center line of this unit and 1.8 m (6.0 it) or more
away from it. Also, make sure place the IutelliBeam
microphone within 1 m (3.3 it) upper or lower from
the center height of this unit.
w
>
©
m
c
m
m
©
>
z
x
15 En
Loading ...
Loading ...
Loading ...