Loading ...
Loading ...
Loading ...
o
-O_C_<>
WVOL CH WLUME
__j,5, ¸,,_,
cg) _ CiD
(2D G?D _(N)
,00Es_
CD
_YAMAHA
@Input selector keys
@ENTER
@ _,/'_/4/1>
@_
@RETURN
@SETUP
1Press @SETUP.
'=,_ i IH_NIi
-_,,i"!EHOR*?
,,_:IU°[O _;E"i UP
,,i"I_:!DiU_:IL.._:rLi_'
,,:i_;Oi.JNDLE r i"iENU
,, :[DiPLi°[ HEi'.iLi
.:E?,TE 2, "E ",.:....".
2Press @ _ /_to select the desired menu
and then press @ENTER.
'::"!'!fi!,!UfiL' ZTT'
-_:[ ::,:I_;E°[7 :[NG F'gRgH! 7rER5
::::'..'g"? '_ .:i[:, :i:L".[:. .°
::!;::,i Hg(_iE: LOCFCF:[OH
[.&[].." [_F[] ',',UP..'Do_,_"_
[ ELTE,.: '] '_E¢,.:.....¢
•To return to the previous menu, press @RETURN.
Press @/', /"7 /<_/_and @ENTER to
configure each parameter.
• The initial settings are marked with "*".
• The menu screen disappears if one of the @Input selector
keys is pressed while the SET MENU is being configured.
4To exit from the menu, press @SETUP.
Use this menu to manually adjust the parameters related to
the sound beam output. To fine-adjust parameters
configured by AUTO SETUR use "BEAM
ADJUSTMENT" and "IMAGE LOCATION".
•SETTING PARAMETERS (Setting
parameters)
SET MENU _MANUAL SETUP _SETTING
PARAMETERS
Use to set the position of this unit in your listening room
and the distance of this unit fiom the listening position.
• If you make a_tiustments in "SETTING PARAMETERS", the
"BEAM ADJUSTMENT" parameters are automatically
adjusted.
• If you make adjustments in "SETTING PARAMETERS", the
beam optimization settings made in the AUTO SETUP
procedure will be lost.
In "SETTING PARAMETERS 113", configure
"INSTALLED POSITION".
Select the installed position of this unit.
Choices: FLAT TO WALL* (parallel to wall),
ANGLE TO WALL OR CORNER (angle to wall or
corner)
ANGLE TO WALL OR
FLAT TO WALL CORNER
/
• If you change this setting "BEAM MODE" setting
changes autonaatically (page 23).
Configure "INSTALLED HEIGHT".
Specify the installed height of this unit.
Control range: 0.0 m to 3.0 m (0.0 ft to 10.0 It)
Initial setting: 1.0 m (3.5 It)
0.0 to 3.0 m
.0 ft to 10.0 ft)
• Press (_) _ to proceed to the next page.
In "SETTING PARAMETERS 213", configure
the listening room settings.
Specify the length and width of the listening room.
Control range: 2.0 m to 12.0 m (6.5 ft to 40.0 It)
When this unit is
installed parallel to wall,
specify the width of the
listening room and the
distance between this
unit and rear wall.
When this unit is
installed at the corner of
the room, specify the
width of length of the
listening room.
In "SETTING PARAMETERS 313", configure
the distance settings.
Specify the distance between the listening position
and this unit. When this unit is installed parallel to
wall, you also need to specify the distance between
the listening position and left wall.
34 En
Loading ...
Loading ...
Loading ...