Loading ...
Loading ...
Loading ...
Control range (fiom this unit): 1.8 m to 9.0 m (6.0 ft
to 30.0 fl)
Control range (from left wall): 0.6 m to l 1.4 m (2.0 fl
to 38.0 fl)
1.8 to 9.0 m
(6.0 to 30.0 ft)
FLAT TO WALL
0.6 to 11.4 m
(2.0 to 38.0 ft)
BEAM ADJUSTMENT (Beam adjustment)
SET MENU _MANUAL SETUP _BEAM
ADJUSTMENT
Use to manually adjust the various sotmd beam settings.
The "BEAM ADJUSTMENT" parameters are automatically
adjusted (except "Center" in "FOCAL LENGTH") if you run
the AUTO SETUP (page 15) or if you configure "SETTING
PARAMETERS" (page 34).
Depending on the beam mode settings (page 23), some channel
positions may not be available for selection. In this case, " "
is displayed.
Configure "HORIZONTAL ANGLE".
Adjust the horizontal angle (51sotmd beams for each
channel using test tones.
Adjust toward L (left) to move the direction of the
output to the left and adjust toward R (right) to move
it to the right.
Control range: L90 ° to R90 °
(-)
(+)
(+)
(-)
Press (_) _ to switch the channels.
Configure "VERTICAL ANGLE".
Adjust the vertical angle (51sound beams for each
channel using test tones.
Adjust toward - (minus) to move the angle downward
and adjust toward + (plus) to move the angle upward.
Control range: -45 ° to +45 °
._(+)
<)
"_(_)
Configure "BEAM TRAVEL LENGTH".
Adjust the distance that sound beams travel after
being output and reflected offthe wall until they
anive at the listening position so that all sounds can
anive at the listening position at the same time.
Configure this setting only when you have adjusted
"HORIZONTAL ANGLE".
Control range: 0.3 m to 24.0 m (1.0 ft to 80.0 It)
The length of each
arrow indicates the
beam travel length.
Configure "FOCAL LENGTH".
Adjust the distance fiom the fiont of this unit to the
focal point of output for each channel to achieve an
expansive feeling for each channel. Adjust toward -
(minus) to move the focus outward (widen the sweet
spot) and adjust toward + (plus) to move the focus
toward the normal position (nanow the sweet spot).
point
Focal
length -
Sweet
spot
I
Control range: -1.0 m to +13.0 m (-3.5 ft to +43.5 ft)
We recommend that you use the initial setting (-0.5 m or-
1.5 ft) for "Center".
The width of the sweet spot becomes slightly wider than
the width of this unit if you run the AUTO SETUP
(page 15) or if you configure "SETTING
PARAMETERS" (page 34).
Example
Front left channel Center channel
IMAGE LOCATION (Image location)
SET MENU _MANUAL SETUP _IMAGE
LOCATION
Use to adjust the direction fiom which the fiont left and
right channel sound is heard so that each sound can be
heard closer to the center channel.
Use this feature to redirect audio signals if the sound
coming fiom the fiont left and right channels seems
unnatural.
Z
©
c
©
z
m
z
w
>
©
m
c
>
m
z
x
35 En
Loading ...
Loading ...
Loading ...