Loading ...
Loading ...
Loading ...
CHANGING THE PRESSER FOOT
46
d
Set the adapter on the presser foot bar, aligning the flat
side of the adapter opening with the flat side of the
presser bar. Align the screw holes in the adapter and
presser foot bar, and then securely tighten the screw
with the disc-shaped screwdriver.
e
Turn the included small screw 2 or 3 times with your
hand.
f
Touch to unlock all keys and buttons.
Using the Compact Dual Feed Foot
The compact dual feed foot enables you to have best fabric
control when sewing difficult fabrics that slip easily, such as
quilted fabrics or fabrics that tend to stick to the bottom of a
presser foot, such as vinyl, leather or synthetic leather.
Attaching the Compact Dual Feed Foot
a
Remove the presser foot. (page 45)
b
Loosen the screw of the presser foot holder to remove
the presser foot holder.
c
Position the compact dual feed foot to the presser foot
bar by aligning the notch of the compact dual feed foot
to the large screw.
Side view
d
Hold the compact dual feed foot in place with your
right hand, then using the disc-shaped screwdriver
securely tighten the large screw.
e
Plug the connector of the compact dual feed foot into
the jack on the back of your machine.
f
Touch to unlock all keys and buttons.
All keys and operation buttons are unlocked, and the
previous screen is displayed.
g
Place the fabric under the compact dual feed foot with
the needle at the starting point of the stitching.
Note
• When sewing with the compact dual feed foot, sew
at medium to low speeds.
Memo
• When selecting stitches to be used with the
compact dual feed foot, only the stitches that can
be used will be activated on the display.
• When sewing fabric that easily sticks together, a
more attractive finish can be achieved by basting
the beginning of sewing.
1 Presser foot holder
screw
2 Presser foot holder
a
b
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.
Loading ...
Loading ...
Loading ...