Brother INNOV-IS XJ2 Sewing & Embroidery Machine

Operation Manual - Page 193

For INNOV-IS XJ2.

PDF File Manual, 212 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
191
APPENDIX
7
The pattern is not embroidered correctly.
Thread is twisted.
Thread tension is set incorrectly. 58, 147
Fabric was not inserted into the frame correctly
(fabric was loose, etc.).
127
Stabilizing material was not attached.
Always use stabilizing material, especially with
stretch fabrics, lightweight fabrics, fabrics with a
coarse weave, or fabrics that often cause
pattern shrinkage. See your authorized Brother
dealer for the proper stabilizer.
126
There was an object placed near the machine, and
the carriage or embroidery frame hit the object
during embroidering.
104
Fabric outside the frame edges interferes with the
arm, so the embroidery unit cannot move.
Reinsert the fabric in the embroidery frame so
that the excess fabric is away from the arm, and
rotate the pattern 180 degrees.
127
Fabric is too heavy, so the embroidery unit cannot
move freely.
Place a large thick book or similar object under
the arm head to lightly lift the heavy side and
keep it level.
Fabric is hanging off the table.
If the fabric is hanging off the table during
embroidery, the embroidery unit will not move
freely. Place the fabric so that it does not hang
off the table or hold the fabric to keep it from
dragging.
138
Fabric is snagged or caught on something.
Stop the machine and place the fabric so that it
does not get caught or snagged.
Embroidery frame was removed during
embroidering (for example, to reset the bobbin).
The presser foot was bumped or moved while
removing or attaching the embroidery frame, or the
embroidery unit was moved.
141
Stabilizer is incorrectly attached, for example, it is
smaller than the embroidery frame.
126
Loops appear on the surface of the fabric when
embroidering
The thread tension is incorrectly set. 147
The tension of the upper thread is incorrectly set
for the combination of the fabric, thread and
pattern being used.
Use the embroidery needle plate cover.
138
The combination of the bobbin case and bobbin
thread is incorrect.
137
Symptom, Cause/solution
Reference
Loading ...
Loading ...
Loading ...