Loading ...
Loading ...
Loading ...
THE 2-POINT EMBROIDERY POSITIONING FUNCTION
134
c
Select the pattern.
d
Touch to display the embroidery screen.
e
Touch and then touch .
1 Switch on/off the 2-point embroidery positioning
function with a LED pointer.
f
If a message appears, indicating that the move and
rotate settings will return to the original ones, touch
.
g
From the reference points shown in the screen, select
the point to be used for aligning the pattern.
For this example, select the point in the lower-left
corner of the pattern.
h
Touch .
i
Select the direction (from the reference point) to be
used as a reference for aligning the pattern.
For this example, select the arrow pointing to the right
as the reference direction.
1 Cancel the pattern alignment settings.
2 Return to the previous screen.
j
Touch .
k
Touch the positioning keys to move the embroidery
frame until the position of the LED pointer and the
center of the first mark are aligned.
To change the speed that the frame moves, use the
frame movement speed keys. If it is difficult to make a
precision alignment, touch a frame movement speed
key for a slower speed.
1 Positioning keys
2 Frame movement speed keys
3 Center of the first mark
4 Light of the LED pointer
Memo
• The LED pointer lights up to indicate the needle
drop point.
• When the LED pointer is turned on, the embroidery
foot height is automatically adjusted according to
the fabric thickness.
• If the surface of the fabric is too uneven or rough,
check and adjust the alignment of the light of the
LED pointer and the needle drop point before
starting to embroider.
1
2
1
1
2
c
d
Loading ...
Loading ...
Loading ...