Loading ...
Loading ...
Loading ...
English English 94 95
Care and maintenance - Oven
Care and maintenance - Oven
Care and maintenance - Oven
Reinstalling the oven doors
CAUTION
The door is very heavy. You may need help lifting the door high enough to slide it into the
hinge slots. Do not lift the door by the handle.
A
A. Slot in the oven cavity for the door
hinge lock
1. Using two hands, grasp the side edges
of the door at the midpoint. Face the
oven cavity.
2. Place the door near the product.
3. Locate the slots on each side of the
oven cavity for the door hinge locks.
4. Hold the door at a 45° angle, and then
align the door hinges with the slots
in the lower front of the oven cavity.
Slowly insert the door, making sure
you maintain the 45° angle. You will
know the door is engaged in the slot
when you feel a slight drop.
5. Open the door fully. If the oven door
does not open to a full 90°, repeat
steps 1 through 4.
6. At the bottom corners of the door,
flip the hinge locks forward to lock
them. See Step 3 (illustration A) in the
Removing the oven doors section for
the proper locked position.
7. Close the oven door.
NOTE
When the hinges are properly installed
and the door is closed, there should be
an even gap between the door and the
control panel. If one side of the oven door
is hanging lower than the other, the hinge
on that side is not properly installed.
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 94-95DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 94-95 2023-01-17 오후 3:02:022023-01-17 오후 3:02:02
Loading ...
Loading ...
Loading ...