Loading ...
Loading ...
Loading ...
English English 64 65
Using the oven
Using the oven
Using the oven
Green cleaning
For light cleaning, the Green-cleaning function saves time and energy. For heavier duty cleaning,
use the self-cleaning function.
How to run a green cleaning cycle
1. Make sure the oven door is unlocked and closed
completely.
2. Pour approximately 10 oz. (300 ml) of water onto
the bottom of the empty oven and then close the
oven door. Use normal water only, not distilled
water.
3. Turn the mode and temperature selector knobs to
the Off position.
4. Turn the mode selector knob from Off to the Clean
position.
Clean Mode
Green Clean™
5. press <,> to select Green cleaning mode. Press OK to
start Green Cleaning.
6. When the operation is complete, the display will
blink and a beep will sound. And then turn the mode
knob to the Off position.
7. Clean the oven's interior. There will be a significant
amount of water remaining on the bottom of the
oven after a green-cleaning cycle. Remove the
residual water with a sponge or soft dry cloth.
You can cancel Green Cleaning at any time by setting the mode selector knob to the Off
position.
NOTE
When green-cleaning, use exactly 10 oz. of water since this produces the best results.
If you press Green Clean when the oven temperature is above 125 °F, Hot will appear
in the display. Because this function produces the best results when started while the
oven is cool, we recommend that you wait until the oven has cooled down and Hot
disappears from the display.
After a green-cleaning cycle
Take care when opening the door after a green-cleaning procedure has ended. The
water on the bottom is hot.
Open the oven door and remove the remaining water with a sponge. Do not leave the
residual water in the oven for any length of time. Wipe the oven clean and dry with a
soft cloth. Do not forget to wipe under the oven door seal.
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven
interior. Remove stubborn residue with a nylon scourer. You can remove lime deposits
with a cloth soaked in vinegar.
If the oven remains dirty, you can repeat the procedure once the oven has cooled.
For heavy residue, such as grease left over from roasting, we recommend that you rub
detergent into the residue before activating the green-cleaning function.
After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel
surface to dry thoroughly.
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 64-65DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 64-65 2023-01-17 오후 3:01:572023-01-17 오후 3:01:57
Loading ...
Loading ...
Loading ...