Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/25041834-eca7b1231-hnp-xa-f/bg5b.png)
81
when the system detects abnormal sound input.
●
Intensity change: Click to enable
Intensity Change
and then configure
Sensitivity
and
Threshold
. The alarm is triggered when the system detects that the
sound intensity exceeds the configured threshold.
◇
The alarm is easier to be triggered with higher sensitivity or smaller threshold. Set a
high threshold for noisy environment.
◇
The red line in the waveform indicates audio detection is triggered, and the green
one indicates no audio is detected. Adjust sensitivity and threshold according to the
waveform.
Figure 4-76 Audio detection
Step 4 Set arming periods and alarm linkage action. For details, see "4.6.1.2 Alarm Linkage".
If the exiting schedules cannot meet the scene requirement, you can click
Add Schedule
to add a new schedule. For details, see "4.6.1.2.1 Adding Schedule".
Anti-dither: After the
Anti-dither
time is set, the system only records one motion detection
event in the period.
Step 5 Click
Apply
.
4.7 Storage
Display the information of the local SD card. You can set it as read only or read & write; you can also
Loading ...
Loading ...
Loading ...