Loading ...
Loading ...
Loading ...
50
Result
●
In the web page, click and then select
local
. In the
Play Parameter
area, select
Protocol
as
Multicast.
●
Click
Live
on the main page of the web page, and then monitor the video image of
corresponding stream in a multicast form on the
Live
page.
4.4.10 Register
After you enable this function, when the camera is connected into Internet, it will report the current
location to the specified server which acts as the transit to make it easier for the client software to
access the camera.
Step 1 Select >
Network
>
Register
.
Step 2 Click , and then configure
Server Address
,
Port
and
Sub-Device ID
.
Figure 4-40 Register
Table 4-21 Description of register parameters
Parameter Description
Server Address The IP address or domain name of the server to be registered.
Port The port number of the server to be registered.
Sub-Device ID The custom ID for the camera.
Step 3 Click
Apply
.
4.4.11 QoS
You can solve problems such as network delay and congestion with QoS (Quality of Service)
function. It helps to assure bandwidth, reduce transmission delay, packet loss rate, and delay jitter to
improve experience.
Step 1 Select >
Network
>
QoS
.
Step 2 Configure QoS parameters.
Loading ...
Loading ...
Loading ...