Loading ...
Loading ...
Loading ...
14
4.3.1.3 Adjusting Image
You can configure image parameters. The actual parameters of the camera can be adjusted here.
Step 1 Click on the upper-right corner of the page, and then select
Camera
>
Image
>
Image
.
Step 2 Select the camera that needs to be configured from the
Channel
drop-down list and then
configure parameters.
Figure 4-6 Image
Table 4-3 Description of image parameters
Parameter Description
Style
Select the image style from soft, standard and vivid.
●
Standard: Default image style, which displays the actual color of the
image.
●
Soft: The hue of the image is weaker than the actual one, and
contrast is smaller.
●
Vivid: The image is more vivid than the actual one.
Brightness
Change the overall brightness of the image. The higher the value, the
brighter the image. The image might be hazy if the value is configured
too high.
Contrast
Change the contrast of the image. The higher the value, the greater the
contrast between bright and dark areas. If the value is too big, the dark
area will be too dark and the bright area will more vulnerable to
overexposure. The image might be hazy if the value is set too small.
Saturation
Set the intensity of colors. The higher the value, the deeper the color.
Saturation value does not change image brightness.
Chroma Gain
Suppression
Reduce the image color and prevents it from being too strong. The
higher the value, the stronger the effect.
This parameter takes effect only when the Camera is in an environment
with low luminance.
Sharpness
Change the sharpness of image edges. The higher the value, the clearer
the image edges. If the value is too high, image noise is more likely to
appear.
Loading ...
Loading ...
Loading ...