Loading ...
Loading ...
Loading ...
127
Step 6 Click
Apply
.
Step 7 Click
Test
to test whether FTP function works normally.
7.4.2.2 NAS
Enable this function, and you can save all the files in the NAS.
Step 1 Select
Picture
>
Storage
.
Step 2 Select the snapshot strategy in
Disk Full
.
●
Overwrite
: Cyclically overwrite the earliest snapshot when the disk is full.
●
Stop
: Stop snapshot when the disk is full.
Step 3 Select
Network storage
in
Storage Method
, and select
NAS
to save the snapshots in NAS
server.
Step 4 Select NAS protocol type.
●
NFS
(Network File System): A file system which enables computers in the same network
share files through TCP/IP.
●
SMB
(Server Message Block): Provides shared access for clients and servers.
Figure 7-12 NAS
Step 5 Select to enable NAS function, and then configure NAS parameters.
Table 7-5 Description of NAS parameters
Parameter Description
Server IP The IP address of the NAS server.
Storage Path The destination path in the NAS server.
Username
Username for logging in to the NAS server.
This is required when the protocol type is SMB.
Password
Password for logging in to the NAS server.
This is required when the protocol type is SMB.
Step 6 Click
Apply
.
Loading ...
Loading ...
Loading ...