Loading ...
Loading ...
Loading ...
132
Click to delete face database.
8.2.1.2.2 Adding Face Images
Add face images to the created face database. You can add them one by one or in batches.
Requirements on face images:
●
A single image size is 50 KB–150 KB in JPEG format. The resolution is less than 1920 × 1080.
●
Face size is 30%–60% of the whole image. There must be at least 100 pixels between the ears.
●
Taken in full-face view directly facing the camera without makeup, filters, glasses, and fringe.
Eyebrow, mouth and other face features must be visible.
Single Adding
Add face images one by one. Select this way when you need to add a small number of face images.
Step 1 Click
AI
>
AI Config
>
Smart Plan
.
Step 2 Click
Rule Config
and then select
Face Recognition
.
Step 3 Click
Face Database Config
to enter the face database configuration page, and then click
next to the face database to be configured.
Step 4 Click
Register
.
Step 5 Click
Upload
to select the face image you want to upload, and then click
Open
.
After uploading the image, select a face area and click
OK
to save the face image. If there
are multiple faces in an image, select the target face and click
OK
to save the face image.
Figure 8-6 Add images
Step 6 Enter the information about face image according to the actual situation, and then click
Loading ...
Loading ...
Loading ...