Loading ...
Loading ...
Loading ...
45
and wide area networks. This function enables you to visit local area device through wide area IP
address.
Prerequisites
●
Make sure the UPnP service is installed in the system.
●
Log in to the router, and then configure WAN IP address to set up internet connection.
●
Enable UPnP in the router.
●
Connect your device to the LAN port of the router.
●
Select >
Network
>
TCP/IP
, in
IP Address
, enter the local area IP address of the router or
select
DHCP
and then the system acquires IP address automatically.
Procedure
Step 1 Select >
Network
>
UPnP
.
Step 2 Click next to
Enable
, and there are two mapping modes:
Custom
and
Default
.
Figure 4-35 UPnP
●
Select
Custom
, click and then you can change external port.
●
Select
Default
, and then the system finishes mapping with unoccupied port
automatically, and you cannot edit mapping relation.
●
Select
Enable Device Discovery
to search for the device through the PC's online
neighbors. The device name is the serial number.
Step 3 Click
Apply
.
Open web browser on PC, enter http:// wide area IP address: external port number, and then
you can visit the local area device with corresponding port.
4.4.7 SNMP
SNMP (Simple Network Management Protocol) can be used to enable software such as MIB Builder
and MG-SOFT MIB Browser to connect to the camera, and then manage and monitor the camera.
Prerequisites
●
Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB Browser.
●
Get the MIB file of the matched version from technical support.
Procedure
Step 1 Select >
Network
>
SNMP
.
Step 2 Select SNMP version to enable SNMP.
●
Select
V1
, and the system can only process information of V1 version.
●
Select
V2
, and the system can only process information of V2 version.
Loading ...
Loading ...
Loading ...