Loading ...
Loading ...
Loading ...
36
Figure 4-29 TCP/IP
Table 4-14 Description of TCP/IP parameters
Parameter Description
Host Name
Enter the host name.
The maximum length is 32 characters.
ARP/Ping
Click to enable ARP/Ping to set IP address service. Get the
camera MAC address, and then you can change and configure the
device IP address with ARP (Address Resolution Protocol) /ping
command. This is enabled by default. During restart, you will have no
more than 2 minutes to configure the device IP address by a ping
packet with certain length, the server will be turned off in 2 minutes,
or it will be turned off immediately after the IP address is successfully
configured. If this is not enabled, the IP address cannot be configured
with ping packet.
NIC
Select the Ethernet card that need to be configured, and the default
one is
Wire
.
Loading ...
Loading ...
Loading ...