Loading ...
Loading ...
Loading ...
103
Parameter Description
Tour
Configure tour number. Click
Start
and the device automatically
rotates back and forth in the order of the set preset points. Click
Stop
to finish tour.
Pattern
Configure pattern number. Click
Start
and the device automatically
rotates back and forth according to the set operating record. Click
Stop
to finish pattern. The operation record includes the manual
operations that the performed to the PTZ, and the changes in focus
and zoom.
Pan
Click
Start
, and then the Camera starts continuous 360° rotation in a
horizontal way at a certain speed.
Go to
Configure horizontal angle, vertical angel and zoom. Click
Go to
to
pinpoint to a point.
5.4.4 OSD Information
If you want to represent such information in video images as preset dots, PTZ/geography location,
zoom and touring pattern, you can enable this function.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
OSD Info
.
Figure 5-6 OSD info
Step 2 Configure OSD Information.
Table 5-6 Description of OSD information parameter
Parameter Description
Preset
Click to enable preset function. The preset name is
displayed on the image when the camera turns to the preset, and
it will disappear 3 s later.
PTZ Coordinate
Click to enable PTZ coordinate function, and the PTZ
coordinates information is displayed on the image.
Zoom
Click to enable zoom function, and the zooming
information is displayed on the image.
North
Click to enable north function, and the north direction is
displayed on the image. When you enable the due north
orientation function, the system will prompt you to restart the
PTZ.
Loading ...
Loading ...
Loading ...