Loading ...
Loading ...
Loading ...
146
Table 8-8 Description of global configuration parameter
Parameter Description
Target Box Overlay
Overlay target box on the captured images to mark the target
position.
Four types of target boxes are supported. Select the target box as
needed.
The captured images are stored in SD card or the configured
storage path. For details, see "4.2 Local".
Face Enhancement
Enable
Face Enhancement
to preferably guarantee clear face with
low stream.
Face Cutout
Set a range for matting face image, including face image and one-
inch image.
Picture mode
●
Default: Apply default image parameters to capture images.
●
Number Plate Priority: Apply the image parameters
corresponding to the number plate to capture the image.
●
Face Priority: Apply the image parameters corresponding to the
face to capture the image.
Step 5 Click
Apply
.
8.2.3.2 Rule Configuration
Configure detection scenes and rules, including the rule configuration of people, non-motor vehicles
and motor vehicle.
Prerequisites
Global configuration for video metadata has been completed.
Procedure
Step 1 Select
AI
>
AI Config
>
Smart Plan
.
Step 2 Click
Rule Config
, and then select
Video Metadata
.
Step 3 Click
Rule Config
.
Step 4 Click
Add Rule
and then select rule type from the drop-down list.
The added rules are displayed in the drop-down list. Click the text box under
Name
to edit
the rule name. The rule is enabled by default.
Figure 8-18 Rule configuration (video metadata)
Step 5 Configure image information.
1) Click the after the corresponding rule.
2) Configure overlay information and adjust its position.
This section uses the configuration of non-motor vehicle as an example.
Loading ...
Loading ...
Loading ...