Loading ...
Loading ...
Loading ...
53
Parameter Description
Username
For ordinary cards, the username of telecom is [email protected] or
card. The mobile and Unicom have no username. The username of
special network cards varies from card to card.
Password
For ordinary cards, the password of telecom is vnet.mobi or card.
The mobile and Unicom have no password. The password of special
network cards varies from card to card.
Keep Alive Interval
It refers to the connection time for the mobile user to activate the
device to access the 5G network outside the set time period. The
default value is 30 seconds, and the value ranges from 0 seconds to
7,200 seconds. After the
Keep Alive Interval
ends, the device
actively disconnects the network to achieve the purpose of saving
traffic.
Schedule
Configure the dial-up time period, and then the device will connect
to the 5G network within this specified time period. If the added
schedule does not meet requirements, click
Add Schedule
to add a
new schedule. For details, see "4.6.1.2.1 Adding Schedule".
Network
Status
Dial-up
Status
After the dial-up succeeds, the obtained information, such as the IP
address, is displayed.
●
IMSI: Displays international mobile subscriber identity.
●
IMEI: Displays international mobile equipment identity.
●
ICCID: Displays integrate circuit card identity.
SIM Status
Working
Mode
IP Address
Subnet Mask
Default
Gateway
Frequency
Band
IMSI
IMEI
ICCID
Step 4 Click
Apply
.
4.4.12.2 Mobile Settings
Connects the device to the 5G network by sending messages or making calls through mobile
phones, and alarm information can be received through messages.
●
Send SMS: Set the mobile phone number of the receiver, and then all kinds of alarms can be
linked with the Platform to send alarm SMS to the receiver.
●
Activate by SMS: Set the mobile phone number of the sender, and the sender can send an
activation command SMS to the device to enable the device to connect to the network,
disconnect from the network, or reboot.
◇
Send SMS command "on": means to connect the device to the network.
◇
Send SMS command "off": means to disconnect the device from the network.
◇
Send SMS command "reboot": means to reboot the device.
●
Activate by phone: Set the mobile phone of the caller, and then the caller can call the device and
Loading ...
Loading ...
Loading ...