Loading ...
Loading ...
Loading ...
71
Prerequisites
●
Enable the corresponding alarm type (
Normal
,
Motion
, or
Alarm
) before the record channel
links recording. For details, see "6.3 Setting Record Plan".
●
Enable auto record mode before the record linkage takes effect. For details, see "6.2 Setting
Record Control".
Setting Record Linkage
On the
Alarm
page, click to enable record linkage, select the channel, and then set
Post-
Record
to set alarm linkage and record delay.
After
Post-Record
is configured, alarm recording continues for an extended period after the alarm
ends.
Figure 4-63 Record linkage
4.6.1.2.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots when
an alarm is triggered.
Prerequisites
Enable the corresponding alarm type (
Normal
,
Motion
, or
Alarm
) before the snapshot channel links
capturing. For details, see "6.3 Setting Record Plan".
Setting record linkage
On the
Alarm
page, click to enable snapshot linkage, and select the channel
Figure 4-64 Snapshot linkage
4.6.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the
Alarm
page, click to enable alarm-out linkage, select the channel and then configure
Post alarm
.
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
If the Camera has multiple alarm-out channels, you need to select the linkage alarm-out channel.
Figure 4-65 Alarm-out linkage
Loading ...
Loading ...
Loading ...