Loading ...
Loading ...
Loading ...
130
Figure 8-3 Configuring face recognition rule
Table 8-1 Description of face recognition parameters
Parameter Description
Face Enhancement
Select
Face Enhancement
to preferably guarantee clear faces with
low stream.
Target Box Overlay
You can add a bounding box to the face in the captured image to
highlight the face. The captured face image is saved in SD card or
the
Snapshot Path
. For the
Snapshot Path
see "4.2 Local".
Face Cutout
Set a range for the captured face image, including face and one-
inch image. It supports custom setting. When selecting
Custom
,
click on the right side, configure the parameters on the prompt
page, and then click
Apply
.
●
Customized width: Set snapshot width; enter the times of the
original face width. The value ranges from 1 to 5.
●
Customized face height: Set face height in snapshot; enter the
times of the original face height. The value ranges from 1 to 2.
●
Customized body height: Set body height in snapshot; enter
the times of the original body height. The value ranges from 0
to 4.
When the value is 0, it cuts out the face image only.
Snap Mode
●
Recognition Priority: The device takes snapshot immediately
when it detects faces.
●
Optimized Snapshot: The device captures the clearest images
within the optimized duration after it detects faces.
Optimized duration is configured in the
Advanced
below.
Property
Click
Property
to enable the properties display during face
recognition.
Advanced
Optimized Duration: Set a time period to capture the clearest image
after the camera detects face.
Step 5 Set arming periods and alarm linkage action.
●
Click
Add Schedule
to add time plan. For details, see "4.6.1.2.1 Adding Schedule".
Loading ...
Loading ...
Loading ...