Loading ...
Loading ...
Loading ...
92
For admin account, you can only edit the password.
●
Delete user group.
Click to delete the added users.
The admin account cannot be deleted.
4.8.3 Peripheral Management
Step 1 Select >
System
>
Peripheral
> >
Wiper
.
Step 2 Configure working mode of wipers.
Figure 4-90 Wiper
Table 4-32 Configure parameters of wiper
Parameter Description
Mode
Select the start mode of wiper. Only manual mode is supported at
present.
Interval Time
The interval time between stop mode and start mode. For
example, set the time to 10 s, and the wiper will work every 10 s.
Duration Limit
Enable
Duration Limit
and configure
Max Running Time
, and
then the wiper will automatically turn off when it runs up to this
time.
Max Running Time
Step 3 Click
Apply
.
4.8.4 Manager
4.8.4.1 Requirements
To make sure the system runs normally, maintain it as the following requirements:
●
Check surveillance images regularly.
●
Clear regularly user and user group information that is not frequently used.
●
Change the password every three months. For details, see "4.8.2 Account".
●
View system logs and analyze them, and process the abnormity in time.
Loading ...
Loading ...
Loading ...