Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
98
©
2023 DJI All Rights Reserved.
white. Tap the GNSS positioning status icon to view the RTK mode and GNSS positioning
information.
8. Signal Strength: displays the O3 Pro signal quality. Three white bars indicate strong signal
strength, two yellow bars for medium signal strength, and a red bar for poor signal quality.
If the signal is lost, it displays a disconnected red icon.
9. Intelligent Battery Level: displays the battery level of the aircraft. Tap to view battery level,
voltage, and temperature.
10. Settings: tap to open the Settings menu to set the parameters of each module. Congure
the settings by following the corresponding instructions in app.
a. Flight Control System Settings: include Home Point settings, multiple flight mode
switch, flight mode, return to home, RTH altitude, maximum altitude, distance limit
switch, maximum flight distance, landing gear settings, sensor status, gain & expo
tuning, signal lost action, coordinated turn switch, and target scanning switch.
b. Sensing System Settings: include obstacle avoidance mode, obstacle avoidance
switch, and vision positioning switch.
c. Remote Controller Settings: include remote controller channel, control stick mode,
remote controller calibration, customizable RC buttons, notes for side buttons switch,
and linking.
d. Video Transmission Settings: include work frequency, signal strength, video output
type, video display mode, and video output resolution.
e. Intelligent Battery Settings: include battery information, Smart RTH switch, low battery
warning thresholds, and time to battery self-discharge.
f. Gimbal Settings: include gimbal pitch, pan and roll settings, gimbal pitch limit
extension switch, gimbal calibration, and adjust gimbal.
g
. RTK Settings: include RTK positioning switch, RTK service type, and their
corresponding settings and status displays.
h. Advanced Camera Settings: include Monitoring, Storage, and Others.
i. General Settings: include map selection, show ight trajectory switch, unit settings,
LED settings and ESC beeping switch.
Navigation Display
1
2
3 4
5
6
7
8
8
8
Loading ...
Loading ...
Loading ...