Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
137
Battery Disposal
Dispose of the batteries in specific recycling containers only after a complete discharge. DO
NOT dispose of the batteries in regular trash containers. Strictly follow the local regulations
regarding the disposal and recycling of batteries.
Dispose of a battery immediately if it cannot be powered on after over-discharging.
If the battery level button on the battery is disabled and the battery cannot be fully discharged,
contact a professional battery disposal/recycling agency for further assistance.
C3 Certication
Inspire 3 is complied with C3 certication, there are some requirements and restrictions when
using Inspire 3 in European Economic Area (EEA, i.e. EU plus Norway, Iceland and Liechtenstein).
UAS Class C3
Sound Power Level 98 dB(A)
Maximum Propeller Speed 7100 RPM
Maximum Dimensions (with payload
installed and propellers rotating)
Landing gear raised: 860.7×927.71×508.85 mm
Landing gear lowered: 860.7×927.71×508.85 mm
MTOM Statement
The MTOM of Inspire 3 (Model T740), including two batteries, gimbal camera, lens (with
balancing ring and hood), DJI PROSSD and four propellers, is not larger than 4310 g to comply
with C3 requirement.
Users must follow the instructions below to comply with the MTOM C3 requirements.
Otherwise, the aircraft cannot be used as a C3 UAV:
1. DO NOT add any other payload to the aircraft, make sure that the MTOM is not larger than
4310 g for any ight.
2. DO NOT use any non-qualied replacement parts, such as intelligent batteries or propellers,
etc.
3. DO NOT retrot the aircraft.
Direct Remote ID
1. Transport Method: Wi-Fi Beacon.
2. Method of uploading the UAS Operator Registration Number to the aircraft: Enter DJI Pilot 2
> GEO Zone Map > UAS Remote Identication, and then upload UAS Operator Registration
Number.
Loading ...
Loading ...
Loading ...