Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
119
Calibrating the Compass
Only calibrate the compass when prompted to do so by the DJI Pilot 2 app or the aircraft rear
indicators. Observe the following rules when calibrating the compass:
• It is recommended to calibrate the compass to ensure the quality of the images and
videos when features require high aircraft orientation accuracy, such as long-time
exposure during hovering.
• DO NOT calibrate the compass in locations with strong magnetic interference, such as
near magnets, parking lots, or construction sites with underground reinforced concrete
structures.
• DO NOT carry ferromagnetic materials such as mobile phones during calibration.
• DJI Pilot 2 will display a prompt if the compass is aected by strong interference after
calibration is complete. Follow the displayed instructions to resolve the compass issue.
Calibration Procedure
Perform the calibration in an open area and follow the steps below to complete the calibration.
1. Run the DJI Pilot 2 app and enter the camera view on the home screen. Tap > > Sensor
Status, then Compass, and Calibrate Compass to start the calibration. The aircraft rear LED
indicators will glow in solid yellow, which indicates that the calibration has started.
2. Hold the aircraft horizontally 1.5 m (4.92 ft) above the ground and rotate the aircraft 360
degrees. The aircraft rear LED indicators will glow in solid green.
3. Hold the aircraft vertically and rotate the aircraft 360 degrees.
4. Re-calibrate the aircraft if the aircraft rear LED indicators blink red.
• If the aircraft rear LED indicators blink red and yellow alternately after the calibration is
complete, it indicates strong interference in the current location. Move your aircraft to a
dierent location and try again.
• A prompt will appear in DJI Pilot 2 if compass calibration is required before takeo. The
prompt will disappear after the calibration is complete.
• If the compass calibration is complete, place the aircraft on the ground. If the prompt
appears again in DJI Pilot 2, try moving the aircraft to a different location before
recalibrating the compass.
Loading ...
Loading ...
Loading ...