Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
44
©
2023 DJI All Rights Reserved.
1. Timecode Input Port
2. USB-C Assistant Port
Timecode Input Port
Use a time code synchronizer with a 3.5mm audio jack (sold separately). Follow the steps below
to synchronize the time code of the camera.
1. Power on the remote controller and the aircraft.
2. Go to the DJI Pilot 2 camera view, tap > > Camera Advanced Settings panel, set the
timecode running mode to Free and the mode to Jam Sync.
3. Make sure that the timecode synchronizer and the camera parameters (counting mode and
project frame rate) are the same.
4. Insert the timecode synchronizer into the timecode input port on the bottom of the aircraft.
5. When the EXT icon is displayed on the timecode in the app, the synchronization is successful.
USB-C Assistant Port
Connect the USB-C assistant port on the aircraft to a computer, and run DJI Assistant 2 to
update the aircraft firmware. When connecting, make sure that there is no interference
between the data cable and the gimbal camera rotation, especially the rotation of the gimbal
pan.
1
2
Expansion Ports
Loading ...
Loading ...
Loading ...