Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
138
©
2023 DJI All Rights Reserved.
List of Items, Including Qualied Accessories
Part Weight Dimension
Zenmuse X9-8K Air Gimbal Camera Approx.516 g 127.5×120.6×156.0 mm
DL 18mm F2.8 ASPH Lens Approx. 182 g Φ64.5×62.8 mm
DL 24mm F2.8 LS ASPH Lens Approx. 178 g Φ55.0×71.2 mm
DL 35mm F2.8 LS ASPH Lens Approx. 179 g Φ55.0×71.2 mm
DL 50mm F2.8 LS ASPH Lens Approx. 182 g Φ55.0×71.2 mm
DL Lens ND4 Filter (Φ46mm) Approx. 9 g Φ46 mm
DL Lens ND8 Filter (Φ46mm) Approx. 9 g Φ46 mm
DL Lens ND16 Filter (Φ46mm) Approx. 9 g Φ46 mm
DL Lens ND32 Filter (Φ46mm) Approx. 9 g Φ46 mm
DL Lens ND64 Filter (Φ46mm) Approx. 9 g Φ46 mm
DL Lens ND128 Filter (Φ46mm) Approx. 9 g Φ46 mm
Balancing Ring Approx. 9 g Φ46 mm
DL Lens Protector (Φ46mm) Approx. 9 g Φ46 mm
Inspire 3 Foldable Quick-Release Propeller Approx. 12.7 g 40.6×18 cm
PROSSD 1TB Approx. 45.5 g 96×29.4×10.3 mm
TB51 Intelligent Battery Approx.470 g 117.3×90×33.3 mm
TB51 Intelligent Battery Charging Hub Approx.1680 g 84×97×243.1 mm (folded)
List of Spare and Replacement Parts
Inspire 3 Foldable Quick-Release Propellers (Pair) (Model: DJI 1671)
TB51 Intelligent Battery (Model: TB51-4280-23.1)
Remote Controller Warnings
The remote controller indicator will glow red after disconnecting from the aircraft for more than
two seconds.
DJI Pilot 2 will prompt a warning after disconnecting from the aircraft.
There will be an alert if the remote controller is not used for ve minutes while it is powered
on but the touchscreen is o and it is not connected to the aircraft. It will automatically power
o after a further 30 seconds. Move the control sticks or perform any other remote controller
action to cancel the alert.
• Avoid interference between the remote controller and other wireless device. Make sure to
turn o the Wi-Fi on nearby mobile devices. Land the aircraft as soon as possible if there is
interference.
• DO NOT operate the aircraft if lighting conditions are too bright or dark when using a remote
controller to monitor the flight. Users are responsible for correctly adjusting the display
brightness when using the remote controller in direct sunlight during ight operation.
• Release the control sticks or press the ight pause button if an unexpected operation occurs.
Loading ...
Loading ...
Loading ...