Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
121
Auto Takeo/Auto Return to Home
Auto Takeo
Use the Auto Takeo function:
1. Launch DJI Pilot 2 and enter the gimbal camera view.
2. Complete all steps in the pre-ight checklist.
3. Tap . If conditions are safe for takeo, press and hold the button to conrm.
4. The aircraft will takeo and hover approx. 1.2 m (3.9 ft) above the ground.
Auto Return to Home
Use the Auto RTH function:
1. Tap . If conditions are safe to land, press and hold the button to conrm.
2. Auto RTH can be canceled by tapping .
3. If the Downward Vision System is working normally, Landing Protection will be enabled.
4. Motors will stop automatically after landing.
• Choose the proper place for landing.
Starting/Stopping the Motors
Starting the Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the inner
or outer bottom corners to start the motors. Once the motors start spinning, release both sticks
simultaneously.
Stopping the Motors
The motors can be stopped in two ways:
Method 1: When the aircraft has landed, push the throttle stick down and hold. The motors will
stop after three seconds.
Method 2: When the aircraft has landed, push the throttle stick down, and perform the same
CSC used to start the motors. Release both sticks once the motors have stopped.
1
2
• If the motor is started unexpected, use CSC to stop motors immediately.
Loading ...
Loading ...
Loading ...