Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
136
©
2023 DJI All Rights Reserved.
Troubleshooting Procedures
1. Why can the battery not be used before the rst ight?
The battery must be activated by charging before using it for the rst time.
2. How to solve the gimbal drift issue during ight?
Calibrate IMU and compass in DJI Pilot 2. If the problem persists, contact DJI Support.
3. No function
Check if the Intelligent Batteries and the remote controller are activated by charging. If the
problems persist, contact DJI Support.
4. Power-on and start-up problems
Check if the battery has power. If yes, contact DJI Support if it cannot be started normally.
5. SW update issues
Follow the instructions in the user manual to update the rmware. If the rmware update
fails, restart all the devices and try again. If the problem persists, contact DJI Support.
6. Procedures to reset to factory default or last known working conguration
Use the DJI Pilot 2 app to reset to factory default.
7. Shutdown and power-o problems
Contact DJI Support.
8. How to detect careless handling or storage in unsafe conditions
Contact DJI Support.
Risk and Warnings
When the aircraft detects a risk after powering on, there will be a warning prompt on DJI Pilot 2.
Pay attention to the list of situations below.
1. If the location is not suitable for takeo.
2. If an obstacle is detected during ight.
3. If the location is not suitable for landing.
4. If the compass and IMU experience interference and need to be calibrated.
5. Follow the on-screen instructions when prompted.
Disposal
Observe the local regulations related to electronic device when dispose the aircraft and remote
controller.
Loading ...
Loading ...
Loading ...