Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
81
Icon Flight Mode
F F-mode (Function)
S S-mode (Sport)
N N-mode (Normal)
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with
electromagnetic interference. A warning prompt will appear if the compass of the remote
controller requires calibration. Tap the warning prompt to start calibration. In other cases,
follow the steps below to calibrate the remote controller.
1. Enter the home screen.
2. Open Settings, swipe up, and select Compass.
3. Follow the diagram on the screen to calibrate the remote controller.
4. The user will receive a prompt when the calibration is successful.
• If the remote controller compass is working normally, “Calibration Success” will be
prompted after entering the calibration view. It is not necessary to perform the
calibration.
HDMI Settings
The touchscreen can be shared with a display screen via an HDMI cable. The resolution can be
set in Settings, Display, and then HDMI or in Camera View, HD settings, and then Video Output
Resolution in the app.
Dual Control Mode
Inspire 3 supports Dual Control mode which allows two pilots to operate an aircraft
simultaneously with remote controllers A and B. In this mode, both remote controllers have
equal control of the aircraft. The roles of both remote controllers operating the aircraft are not
assigned in advance. Instead, either pilot may gain control of the aircraft or the gimbal camera
as needed, allowing for more exibility during the operation.
Control over the aircraft is independent of control over the gimbal camera. When a remote
controller gains control of the aircraft or the gimbal camera, the user can use the remote
controller to operate the aircraft or control the movement of the gimbal camera respectively.
Flight Mode Switch (N/S/F)
Toggle the switch to select a ight mode. Read the Flight Modes section for more information.
Loading ...
Loading ...
Loading ...