Loading ...
Loading ...
Loading ...
DJI Inspire 3
User Manual
©
2023 DJI All Rights Reserved.
133
Storage and Transportation and Maintenance
• DO NOT store the product in a humid or dusty area. Ideally, the aircraft shall be stored in a
cool and dry place at room temperature of 25° C (77° F), and direct sunlight shall be avoided.
• DO NOT store the gimbal camera in humid or dusty areas. The recommended environmental
humidity range is 20-90% RH.
• The storage temperature of the product (excluding TB51 Intelligent Batteries) is from -35° to
40° C (-31° to 104° F).
• Remove the gimbal camera from the aircraft when storing or transporting for an extended
period. Otherwise, the gimbal damper may be damaged.
• Make sure the aircraft is in travel mode when transporting. It is recommended to use the
trolley case whenever transporting the aircraft.
• It is recommended to perform regular maintenance for aircraft. Check every part of the
aircraft after any crash or collision. If you have any problems or questions, please contact DJI
Support or a DJI authorized dealer.
• Maintain the product after using for an extended period in order to keep the product in
the best condition possible and reduce potential safety hazards. The frequency of how
often maintenance should be performed depends on how often the product is used.
Maintenance must be performed at least once every six months. The regular life of the
transformation mechanism is more than 3 years. The internal gear box and grease of the
steering gear supporting to raise or lower the landing gear will have a certain degree of
wear and consumption in approximately six months. So it is normal that the sound during
transformation becomes louder after time. If there are any problems or questions, contact
DJI Support to purchase and replace.
• DO NOT lubricated the aircraft frame arms.
• DO NOT touch the dust-proof cover outside the screw rod.
• DO NOT lubricated the hinge.
• Refer to the maintenance manual for more information.
Loading ...
Loading ...
Loading ...