Loading ...
Loading ...
Loading ...
43
indicate the alarm point. The threshold lines are shown in different colors to differentiate
them from the parameter waveforms.
3. Function Buttons
The operations of all available function buttons on the Live Data screen are described
below:
Cancel All — tap to cancel all selected parameter. Up to 50 parameters can be
selected at one time.
Show Selected/Show All — tap to switch between the two options: one displays the
selected parameters, the other displays all the available items.
Graph Merge — tap to merge selected data graphs (for Waveform Graph Mode only).
This function is very useful when comparing different parameters.
NOTE
This mode supports Graph Merge of 2 to 5 digital parameters. Non-digital parameters are
not supported.
To merge selected data graphs
1) Select parameters to be merged.
2) Tap the Graph Merge button at the bottom of the Live Data screen.
a) This mode only supports parameters that can be represented digitally. If
non-digital parameters are selected, a message will appear advising the
user that the selected parameters are not supported in this mode and to
select 2 to 5 digital parameters. Tap Got It to return to the previous
screen and select supported parameters.
b) If unsupported parameters are selected in this mode, a message will
appear advising the user to only select the supported parameters. A
message will also appear if more than 5 parameters are selected. Select
2 to 5 of the supported parameters and tap the OK button to merge.
3) Tap the Cancel Merging button at the bottom of the Live Data screen to
cancel merge.
To Top — moves a selected data item to the top of the list.
Setting — tap to set recording duration. Eleven options are available: 5 seconds, 15
seconds, 30 seconds, 60 seconds, 90 seconds, 3 minutes, 5 minutes, 10 minutes, 20
minutes, 30 minutes, and 60 minutes.
To set the live data record duration
1. Tap the Settings button at the bottom of the Live Data screen.
2. Tap the > button to the right of Recording time after trigger bar and select a
time length.
Loading ...
Loading ...
Loading ...