Loading ...
Loading ...
Loading ...
123
per division (10 divisions) is displayed along the bottom of the screen. The time base
adjustment affects all of the active scope channels at once.
Measure — allows users to select various types of measurement parameters to be
displayed at the right side of the screen for reference.
A maximum of 5 items are allowed to be selected each time.
To set a specific trigger point
1. Tap the Trigger On button to activate the trigger.
2. Configures the specific trigger source, the trigger slope, and the trigger mode
according to the test demand.
3. Tap and slide the voltage scale reference line up or down to the desired voltage
point. The voltage info is displayed in a small reference box.
4. Tap and slide the time base reference line left or right to the desired point.
5. Tap Start button on the top-right side of the screen to activate the scope
Troubleshooting
If the MaxiScope is not communicating with the tablet, you need to do the followings:
Check if the MaxiScope is properly connected to the tablet through the supplied USB
cable.
If the MaxiScope is already connected to the tablet, but the communication between
the devices has failed, tap the Scope Icon on the top-right side of the screen to reset the
USB connection.
IMPORTANT: All vehicle communications must be terminated before resetting the USB
connection to avoid damage to the devices and the vehicle. The Internet connection may
be aborted during USB reset.
If the communication between the MaxiScope and the tablet still fails after USB reset,
restart the tablet and reconnect the MaxiScope.
MaxiScope Firmware Update
The operating software of the MaxiScope is continuously being developed, and the update
package can be downloaded free from the MaxiScope product webpage on Autel’s
website:
http://www.autel.com.
Loading ...
Loading ...
Loading ...