Loading ...
Loading ...
Loading ...
18
NOTE
The vehicle's DLC is not always located under the dashboard. Refer to the user manual of
the test vehicle for additional connection information.
Non-OBDII Vehicle Connection
This type of connection requires both the main cable and an OBDI adapter for the specific
vehicle being serviced.
There are three possible scenarios for Non-OBDII vehicle connection:
DLC connection supplies both communication and power.
DLC connection supplies communication and power is supplied via the vehicle’s
auxiliary power outlet adapter.
DLC connection supplies communication and power is supplied via the vehicle
battery.
To connect to a Non-OBDII Vehicle
1. Connect the main cable's female adapter to the Vehicle Data Connector on the
VCI device, and tighten the captive screws.
2. Locate the required OBDI adapter and connect its 16-pin jack to the main
cable's male adapter.
3. Connect the attached OBDI adapter to the vehicle's DLC.
NOTE
Some vehicles may have more than one adapter or may have test leads instead of an
adapter. Make the proper connection to the vehicle’s DLC as required.
To connect the auxiliary power outlet adapter
1. Plug the DC power connector of the auxiliary power outlet adapter into the DC
power supply input port on the device.
2. Connect the male connector of the auxiliary power outlet adapter to the vehicle's
auxiliary power outlet.
To connect the clipper cable
1. Connect the tubular plug of the clipper cable to the male connector of the
auxiliary power outlet adapter.
Loading ...
Loading ...
Loading ...