Loading ...
Loading ...
Loading ...
41
2. Tap the Edit button and an edit window will appear.
Figure 4-19 Sample Waveform Edit Screen
3. The parameter is selected automatically in the left column.
4. Select a color from the second column.
5. Select a line thickness from the right column.
6. Tap Done to save the settings and exit, or tap Cancel to exit without saving.
NOTE
In full-screen display, you can edit the waveform color and line thickness by tapping the Edit
button on the upper-right side of the screen.
Digital Gauge Mode — displays the parameters in the form of a digital gauge graph.
Trigger Settings
Tap the drop-down button on the right side of the parameter to open a submenu. The
Trigger button is the last one in the submenu. Tap to display the Trigger Settings
window.
On the Trigger Settings screen, you can set a standard range by filling in a minimum
value and a maximum value. When exceeding this range, the trigger function will be
executed and the device will automatically record and save the generated data. You
can review the saved live data by tapping the Review button at the bottom of the
screen.
Loading ...
Loading ...
Loading ...