Loading ...
Loading ...
Loading ...
37
ESC — tap to return to the previous screen or exit the function.
Erase Codes
After reading the retrieved codes from the vehicle and making repairs, you can erase the
codes from the vehicle using this function. Before performing this function, make sure the
vehicle's ignition key is in the ON (RUN) position with the engine off.
To erase codes
1. Tap Erase codes in the Function Menu.
2. A warning message appears to inform you of data loss when this function is applied.
a) Tap Yes to continue. A confirmation screen appears when the operation is
successfully done.
b) Tap No to exit.
3. Tap ESC on the confirmation screen to exit Erase Codes.
4. Check the Read Codes function again to ensure the operation is successful.
Live Data
When this function is selected, the screen displays the data list for the selected module.
The parameters appear in the order that they are transmitted by the ECU, so expect
variation among vehicles.
Gesture scrolling allows you to quickly move through the data list. Drag your finger up or
down on the screen to reposition the parameters being displayed if the data occupies
more than one screen. The figure below displays a typical Live Data screen:
Loading ...
Loading ...
Loading ...