Loading ...
Loading ...
Loading ...
42
Figure 4-20 Sample Trigger Settings Screen
Two buttons and two input boxes are available in the Trigger Settings window.
a) Trigger — switches the trigger on and off. The trigger is ON by default.
b) Buzzer Alarm — switches the alarm on and off. The alarm function makes a
beeping sound as an alert when the data reading reaches the preset minimum
or maximum value. The buzzer alarm will only sound at the first trigger.
c) MIN — tap this input box to display a virtual keyboard to enter the required lower
threshold value.
d) MAX — tap this input box to display a virtual keyboard to enter the required
upper threshold value.
To set a trigger
1. Tap the drop-down button on the right side of the parameter to open a submenu.
2. Tap the Trigger button on the right side of the submenu to open the Trigger
Settings window.
3. Tap the MIN button on the right side, and enter the required minimum value.
4. Tap the MAX button on the right side, and enter the required maximum value.
5. Tap OK to save the settings and return to the Live Data screen or tap Cancel
to exit without saving.
When the trigger is set, a trigger mark appears in front of the parameter. The mark is
grayed out when it is not triggered, and orange when triggered. Moreover, two horizontal
lines appear on each of the data graphs (when Waveform Graph Mode is applied) to
Loading ...
Loading ...
Loading ...